Call Us:
Dispatch Office:
1800 Phoenix Blvd Atlanta, GA 30349
We'are Open:
Mon - Sun, 24 Hour
lock code being entered on a modern lock

Nowadays, security is a big concern. As days go by, crime rates are climbing extremely fast. So, a lot of people are opting for code locks. Code locks are a stylish way to keep you and your family safe from all sorts of trouble.

One of the most popular code locks is the Schlage keyless entry lock. These locks work wonders for your safety and the safety of your house. However, when it comes to changing the 4digit code of the Schlage lock, it can be a bit tricky as not everyone is familiar with the code-changing process. Hiring a locksmith to change the code is always a good idea, but it can be pretty expensive to hire someone, and it can also become a hassle, as finding a locksmith who knows how to work with these locks is incredibly rare.

So, a common question regarding Schlage lock is, ”How do I change my 4-digit Schlage lock code?” To change the 4-digit code, a few steps need to be taken; otherwise, it can get messed up very fast. The steps to change the four-digit code on a Schlage lock are given below:

How Do I Change My 4-Digit Schlage Lock Code?

There are a few specific steps that need to be followed to change the four-digit user codes on a Schlage lock, and these steps are explained below:

Step One: Pressing The Main Button And Number 1 At The Same Time

lock Keypad

For the first step, all you need to do is locate the main button of the Schlage lock. Locating the Schlage button might be a bit of a challenge. If it seems too challenging, you can try and get some help by using glasses, as the Schlage button is on the smaller side. After you have located the button, all you have to do is press the main button of the Schlage lock and the button with One written on top of it together. Be sure to press both buttons together; otherwise, this will not work.

Step Two: Entering The New User Code

After you have pressed the Schlage button and the number 1 button together, the Schlage button will make a beeping sound and flash a few times. When it is done beeping and flashing, enter the brand-new user code.

While entering your brand new code, keep a notepad or notebook at hand and note down the code as you might forget it, so having the code written somewhere will help if you forget it. If your lock has reached the limit of maximum saved numbers, you won’t be able to add another code.

If you want to erase one of the codes that do exist, then all you have to do is press the Schlage locks main programming code; after that, you will need to press the main button of the Schlage lock along with the number 2 button at once and afterward type in the code you want to delete for deletion. It will be done, and the code you want to delete will be deleted. Afterward, you can put another code on the Schlage lock.

Step Three: Re-Entering The New Programming Code

After you have set the new programming code or the default user codes, the main button of the Schlage lock will flash a few times, along with a beeping sound. When this happens, the next step is to re-enter your new four-digit code, which will confirm the code.

Ensure you do not get your new entry code with the previous one. While you press the Schlage button, do it with caution. If you are trying to delete user codes, then take your time and do it precisely.

Frequently Asked Questions

Here are some frequently asked questions regarding the Schlage lock:

lock code being entered on a modern lock

Is It Possible To Get A 6 Digit Programming Code?

A 6-digit programming code is possible. However, for that, the lock has to be a bit different. A six-digit code is stronger than a four-digit user code. Not all Schlage locks have the same four-digit code system.

What Is An Original Programming Code?

The original programming code is the programming code that was originally placed when the lock was first purchased, and a code was set.

Are Temporary Codes Crucial?

A temporary code on a Schlage lock is not crucial. They can easily be changed, and if needed, they can also be deleted.

What Should Be Done If The Schlage Lock Button Is Beeping Even Though No New Code Was Entered?

Whenever the Schlage lock button is blinking or beeping, it is usually an indication that the battery of the Schlage lock is low, so if the button starts blinking or beeping even before a code has been entered, change the lock. Your problem will be solved in no time.

Is It Possible To Remove All Codes On A Schlage Lock?

To remove all the codes stored on your Schlage lock, you must locate the button of the Schlage lock and then Press it. After that, you enter the main programming code. Then you need to press the number 6 button afterward; you must enter your programming code again to get confirmation that all the codes have been removed. This will delete all the codes and allow you to unseal the lock without using any code until you make a brand-new one.

Why Can’t I Seem To Add A New Entry Code On A Schlage Lock?

There are multiple reasons you might not be able to add a new entry code on a Schlage lock. One of the main reasons is that there are already nineteen codes set on the lock which means the lock doesn’t have space for any new code. So, to avoid such situations, the best thing to do is delete any unnecessary codes; that way, there will be space left for new codes.

Reach Us Now!

Are you tired of looking for a locksmith service to help you with all your lock issues but can’t find a good and trustworthy locksmith company? Well, don’t worry anymore! Flat Rate Locksmith Atlanta, GA, is here to help you with all your locksmith needs. Flat Rate Locksmith Atlanta, GA, has a long range of services that can cater to all your locksmith needs. Starting from commercial locksmith services and residential locksmith services to even commercial locksmith services Flat Rate Locksmith Atlanta, GA, does all.

Whenever you face an issue with your locks, don’t worry. Just pick up your phone and give us a call. Dial 678-686-7426 for emergency locksmith services and our professional locksmiths will be at your doorstep. Our locksmiths are the best in the field, so you surely won’t face any issues with them, and they will help you out in any way they can. Flat Rate Locksmith Atlanta, GA, even provides free estimates and 24/7 locksmith services, so whenever you are in trouble, don’t hesitate just give us a call, and we will be at your doorstep right away.


”How Do I Change My 4 Digit Code that is used on the Schlage lock?” is a very common question for anyone who uses a Schlage lock. Schlage locks provide heavy security; however, it can be tricky to use them at times, especially if you are not accustomed to using a lock with a keypad. The buttons and settings might be a bit puzzling.

However, if you follow the right set of steps, then it will be incredibly easy to change the 4-digit code on a Schlage lock. But you have to be incredibly careful while you do change the code. If you are not careful, then there might be issues with the lock, and it might cause issues with the lock, which can end up being a hassle.

Call Us Now